Online Instructor Led High Voltage Electrical Safety (QEW) Course
Online Instructor Led QEW Course - November 5 & 6, 2025
This two-day course is offered online and will cover and exceed provincial and federal electrical safety requirements for working on high voltage electrical equipment. This course focuses on recognizing and understanding electrical hazards while using the proper procedures for controlling the risk of electric shock, arc flash and arc blast. This course is designed with a focus on industry-accepted standards, including the Workplace Electrical Safety Standard: CSA Z462. Individuals who work on electrical equipment are required to take this course.
Course Outline:
Information and Statistics
Applicable Legislation
Applicable Standards
Arc Flash and Electrical Shock Awareness
Operation of Electrical Equipment
Lockout Tagout and Isolation of Equipment
Personal Protective Equipment
Maintenance on Electrical Systems
Pre-Job Task Analysis
Who Should Attend This Course:
Journeyperson Electricians
Apprentice Electricians
Electrical Technologists
Electronics Technologists
Master Electricians
Journeyperson Instrument Mechanics
Electrical Engineers
Attendee Requirements:
Computer/tablet (this course will share content using Microsoft Teams, a phone screen will be too small to read the content)
Microphone and/or headset
Email address unique to attendee to receive link to exam
Course will begin at 8 AM and will run until approximately 4:30 PM with a 1 hour lunch break and other breaks as needed
Supported browsers are Microsoft Edge, Google Chrome, Firefox, and Safari.
What You Receive
Following the course and successful completion of the exam you will receive by mail:
Certification certificate
Wallet card
Hardhat sticker
Online Instructor Led High Voltage Qualified Electrical Worker (QEW) Refresher Course
Online Instructor Led High Voltage Qualified Electrical Worker (QEW) Refresher Course - November 21, 2025
This one day course covers the provincial and federal electrical safety requirements for working on electrical equipment that is 750V or greater. This course reviews electrical hazards and how to mitigate the risk of electric shock, arc flash and arc blast. This course highlights changes to industry-accepted standards, including but not limited to, the Workplace Electrical Safety Standard, CSA Z462. Individuals who work on electrical equipment are recommended to take this course every three years.
Who should attend this course:
Journeyperson Electricians
Apprentice Electricians
Electrical Technologist
Master Electricians
Journeyperson
Instrument Mechanics
Electrical Engineers
* Prerequisite: High Voltage Electrical Safety or equivalent
Attendee Requirements:
Computer/tablet (this course will share content using Microsoft Teams, a phone screen will be too small to read the content)
Microphone and/or headset
Email address unique to attendee to receive link to exam
Course will begin at 8 AM and will run until approximately 4:30 PM with a 1 hour lunch break and other breaks as needed
Supported browsers are Microsoft Edge, Google Chrome, Firefox, and Safari.
What You Receive
Following the course and successful completion of the exam you will receive by mail:
Certification certificate
Wallet card
Hardhat sticker
Online Instructor Led High Voltage Electrical Safety (QEW) Course
Online Instructor Led QEW Course - December 10 & 11, 2025
This two-day course is offered online and will cover and exceed provincial and federal electrical safety requirements for working on high voltage electrical equipment. This course focuses on recognizing and understanding electrical hazards while using the proper procedures for controlling the risk of electric shock, arc flash and arc blast. This course is designed with a focus on industry-accepted standards, including the Workplace Electrical Safety Standard: CSA Z462. Individuals who work on electrical equipment are required to take this course.
Course Outline:
Information and Statistics
Applicable Legislation
Applicable Standards
Arc Flash and Electrical Shock Awareness
Operation of Electrical Equipment
Lockout Tagout and Isolation of Equipment
Personal Protective Equipment
Maintenance on Electrical Systems
Pre-Job Task Analysis
Who Should Attend This Course:
Journeyperson Electricians
Apprentice Electricians
Electrical Technologists
Electronics Technologists
Master Electricians
Journeyperson Instrument Mechanics
Electrical Engineers
Attendee Requirements:
Computer/tablet (this course will share content using Microsoft Teams, a phone screen will be too small to read the content)
Microphone and/or headset
Email address unique to attendee to receive link to exam
Course will begin at 8 AM and will run until approximately 4:30 PM with a 1 hour lunch break and other breaks as needed
Supported browsers are Microsoft Edge, Google Chrome, Firefox, and Safari.
What You Receive
Following the course and successful completion of the exam you will receive by mail:
Certification certificate
Wallet card
Hardhat sticker
Online Instructor Led High Voltage Qualified Electrical Worker (QEW) Refresher Course
Online Instructor Led High Voltage Qualified Electrical Worker (QEW) Refresher Course - December 17, 2025
This one day course covers the provincial and federal electrical safety requirements for working on electrical equipment that is 750V or greater. This course reviews electrical hazards and how to mitigate the risk of electric shock, arc flash and arc blast. This course highlights changes to industry-accepted standards, including but not limited to, the Workplace Electrical Safety Standard, CSA Z462. Individuals who work on electrical equipment are recommended to take this course every three years.
Who should attend this course:
Journeyperson Electricians
Apprentice Electricians
Electrical Technologist
Master Electricians
Journeyperson
Instrument Mechanics
Electrical Engineers
* Prerequisite: High Voltage Electrical Safety or equivalent
Attendee Requirements:
Computer/tablet (this course will share content using Microsoft Teams, a phone screen will be too small to read the content)
Microphone and/or headset
Email address unique to attendee to receive link to exam
Course will begin at 8 AM and will run until approximately 4:30 PM with a 1 hour lunch break and other breaks as needed
Supported browsers are Microsoft Edge, Google Chrome, Firefox, and Safari.
What You Receive
Following the course and successful completion of the exam you will receive by mail:
Certification certificate
Wallet card
Hardhat sticker
Online Instructor Led High Voltage Electrical Safety (QEW) Course
Online Instructor Led QEW Course - January 21 & 22, 2026
This two-day course is offered online and will cover and exceed provincial and federal electrical safety requirements for working on high voltage electrical equipment. This course focuses on recognizing and understanding electrical hazards while using the proper procedures for controlling the risk of electric shock, arc flash and arc blast. This course is designed with a focus on industry-accepted standards, including the Workplace Electrical Safety Standard: CSA Z462. Individuals who work on electrical equipment are required to take this course.
Course Outline:
Information and Statistics
Applicable Legislation
Applicable Standards
Arc Flash and Electrical Shock Awareness
Operation of Electrical Equipment
Lockout Tagout and Isolation of Equipment
Personal Protective Equipment
Maintenance on Electrical Systems
Pre-Job Task Analysis
Who Should Attend This Course:
Journeyperson Electricians
Apprentice Electricians
Electrical Technologists
Electronics Technologists
Master Electricians
Journeyperson Instrument Mechanics
Electrical Engineers
Attendee Requirements:
Computer/tablet (this course will share content using Microsoft Teams, a phone screen will be too small to read the content)
Microphone and/or headset
Email address unique to attendee to receive link to exam
Course will begin at 8 AM and will run until approximately 4:30 PM with a 1 hour lunch break and other breaks as needed
Supported browsers are Microsoft Edge, Google Chrome, Firefox, and Safari.
What You Receive
Following the course and successful completion of the exam you will receive by mail:
Certification certificate
Wallet card
Hardhat sticker
Online Instructor Led High Voltage Qualified Electrical Worker (QEW) Refresher Course
Online Instructor Led High Voltage Qualified Electrical Worker (QEW) Refresher Course - January 28, 2026.
This one day course covers the provincial and federal electrical safety requirements for working on electrical equipment that is 750V or greater. This course reviews electrical hazards and how to mitigate the risk of electric shock, arc flash and arc blast. This course highlights changes to industry-accepted standards, including but not limited to, the Workplace Electrical Safety Standard, CSA Z462. Individuals who work on electrical equipment are recommended to take this course every three years.
Who should attend this course:
Journeyperson Electricians
Apprentice Electricians
Electrical Technologist
Master Electricians
Journeyperson
Instrument Mechanics
Electrical Engineers
* Prerequisite: High Voltage Electrical Safety or equivalent
Attendee Requirements:
Computer/tablet (this course will share content using Microsoft Teams, a phone screen will be too small to read the content)
Microphone and/or headset
Email address unique to attendee to receive link to exam
Course will begin at 8 AM and will run until approximately 4:30 PM with a 1 hour lunch break and other breaks as needed
Supported browsers are Microsoft Edge, Google Chrome, Firefox, and Safari.
What You Receive
Following the course and successful completion of the exam you will receive by mail:
Certification certificate
Wallet card
Hardhat sticker
Online Instructor Led High Voltage Electrical Safety (QEW) Course
Online Instructor Led QEW Course - February 11 & 12, 2026
This two-day course is offered online and will cover and exceed provincial and federal electrical safety requirements for working on high voltage electrical equipment. This course focuses on recognizing and understanding electrical hazards while using the proper procedures for controlling the risk of electric shock, arc flash and arc blast. This course is designed with a focus on industry-accepted standards, including the Workplace Electrical Safety Standard: CSA Z462. Individuals who work on electrical equipment are required to take this course.
Course Outline:
Information and Statistics
Applicable Legislation
Applicable Standards
Arc Flash and Electrical Shock Awareness
Operation of Electrical Equipment
Lockout Tagout and Isolation of Equipment
Personal Protective Equipment
Maintenance on Electrical Systems
Pre-Job Task Analysis
Who Should Attend This Course:
Journeyperson Electricians
Apprentice Electricians
Electrical Technologists
Electronics Technologists
Master Electricians
Journeyperson Instrument Mechanics
Electrical Engineers
Attendee Requirements:
Computer/tablet (this course will share content using Microsoft Teams, a phone screen will be too small to read the content)
Microphone and/or headset
Email address unique to attendee to receive link to exam
Course will begin at 8 AM and will run until approximately 4:30 PM with a 1 hour lunch break and other breaks as needed
Supported browsers are Microsoft Edge, Google Chrome, Firefox, and Safari.
What You Receive
Following the course and successful completion of the exam you will receive by mail:
Certification certificate
Wallet card
Hardhat sticker
Online Instructor Led High Voltage Qualified Electrical Worker (QEW) Refresher Course
Online Instructor Led High Voltage Qualified Electrical Worker (QEW) Refresher Course - February 25, 2026
This one day course covers the provincial and federal electrical safety requirements for working on electrical equipment that is 750V or greater. This course reviews electrical hazards and how to mitigate the risk of electric shock, arc flash and arc blast. This course highlights changes to industry-accepted standards, including but not limited to, the Workplace Electrical Safety Standard, CSA Z462. Individuals who work on electrical equipment are recommended to take this course every three years.
Who should attend this course:
Journeyperson Electricians
Apprentice Electricians
Electrical Technologist
Master Electricians
Journeyperson
Instrument Mechanics
Electrical Engineers
* Prerequisite: High Voltage Electrical Safety or equivalent
Attendee Requirements:
Computer/tablet (this course will share content using Microsoft Teams, a phone screen will be too small to read the content)
Microphone and/or headset
Email address unique to attendee to receive link to exam
Course will begin at 8 AM and will run until approximately 4:30 PM with a 1 hour lunch break and other breaks as needed
Supported browsers are Microsoft Edge, Google Chrome, Firefox, and Safari.
What You Receive
Following the course and successful completion of the exam you will receive by mail:
Certification certificate
Wallet card
Hardhat sticker
Online Instructor Led High Voltage Electrical Safety (QEW) Course
Online Instructor Led QEW Course - March 17 & 18, 2026
This two-day course is offered online and will cover and exceed provincial and federal electrical safety requirements for working on high voltage electrical equipment. This course focuses on recognizing and understanding electrical hazards while using the proper procedures for controlling the risk of electric shock, arc flash and arc blast. This course is designed with a focus on industry-accepted standards, including the Workplace Electrical Safety Standard: CSA Z462. Individuals who work on electrical equipment are required to take this course.
Course Outline:
Information and Statistics
Applicable Legislation
Applicable Standards
Arc Flash and Electrical Shock Awareness
Operation of Electrical Equipment
Lockout Tagout and Isolation of Equipment
Personal Protective Equipment
Maintenance on Electrical Systems
Pre-Job Task Analysis
Who Should Attend This Course:
Journeyperson Electricians
Apprentice Electricians
Electrical Technologists
Electronics Technologists
Master Electricians
Journeyperson Instrument Mechanics
Electrical Engineers
Attendee Requirements:
Computer/tablet (this course will share content using Microsoft Teams, a phone screen will be too small to read the content)
Microphone and/or headset
Email address unique to attendee to receive link to exam
Course will begin at 8 AM and will run until approximately 4:30 PM with a 1 hour lunch break and other breaks as needed
Supported browsers are Microsoft Edge, Google Chrome, Firefox, and Safari.
What You Receive
Following the course and successful completion of the exam you will receive by mail:
Certification certificate
Wallet card
Hardhat sticker
Online Instructor Led High Voltage Qualified Electrical Worker (QEW) Refresher Course
Online Instructor Led High Voltage Qualified Electrical Worker (QEW) Refresher Course - March 26, 2026
This one day course covers the provincial and federal electrical safety requirements for working on electrical equipment that is 750V or greater. This course reviews electrical hazards and how to mitigate the risk of electric shock, arc flash and arc blast. This course highlights changes to industry-accepted standards, including but not limited to, the Workplace Electrical Safety Standard, CSA Z462. Individuals who work on electrical equipment are recommended to take this course every three years.
Who should attend this course:
Journeyperson Electricians
Apprentice Electricians
Electrical Technologist
Master Electricians
Journeyperson
Instrument Mechanics
Electrical Engineers
* Prerequisite: High Voltage Electrical Safety or equivalent
Attendee Requirements:
Computer/tablet (this course will share content using Microsoft Teams, a phone screen will be too small to read the content)
Microphone and/or headset
Email address unique to attendee to receive link to exam
Course will begin at 8 AM and will run until approximately 4:30 PM with a 1 hour lunch break and other breaks as needed
Supported browsers are Microsoft Edge, Google Chrome, Firefox, and Safari.
What You Receive
Following the course and successful completion of the exam you will receive by mail:
Certification certificate
Wallet card
Hardhat sticker
Online Instructor Led High Voltage Electrical Safety (QEW) Course
Online Instructor Led QEW Course - April 15 & 16, 2026
This two-day course is offered online and will cover and exceed provincial and federal electrical safety requirements for working on high voltage electrical equipment. This course focuses on recognizing and understanding electrical hazards while using the proper procedures for controlling the risk of electric shock, arc flash and arc blast. This course is designed with a focus on industry-accepted standards, including the Workplace Electrical Safety Standard: CSA Z462. Individuals who work on electrical equipment are required to take this course.
Course Outline:
Information and Statistics
Applicable Legislation
Applicable Standards
Arc Flash and Electrical Shock Awareness
Operation of Electrical Equipment
Lockout Tagout and Isolation of Equipment
Personal Protective Equipment
Maintenance on Electrical Systems
Pre-Job Task Analysis
Who Should Attend This Course:
Journeyperson Electricians
Apprentice Electricians
Electrical Technologists
Electronics Technologists
Master Electricians
Journeyperson Instrument Mechanics
Electrical Engineers
Attendee Requirements:
Computer/tablet (this course will share content using Microsoft Teams, a phone screen will be too small to read the content)
Microphone and/or headset
Email address unique to attendee to receive link to exam
Course will begin at 8 AM and will run until approximately 4:30 PM with a 1 hour lunch break and other breaks as needed
Supported browsers are Microsoft Edge, Google Chrome, Firefox, and Safari.
What You Receive
Following the course and successful completion of the exam you will receive by mail:
Certification certificate
Wallet card
Hardhat sticker
Online Instructor Led High Voltage Qualified Electrical Worker (QEW) Refresher Course
Online Instructor Led High Voltage Qualified Electrical Worker (QEW) Refresher Course - April 29, 2026
This one day course covers the provincial and federal electrical safety requirements for working on electrical equipment that is 750V or greater. This course reviews electrical hazards and how to mitigate the risk of electric shock, arc flash and arc blast. This course highlights changes to industry-accepted standards, including but not limited to, the Workplace Electrical Safety Standard, CSA Z462. Individuals who work on electrical equipment are recommended to take this course every three years.
Who should attend this course:
Journeyperson Electricians
Apprentice Electricians
Electrical Technologist
Master Electricians
Journeyperson
Instrument Mechanics
Electrical Engineers
* Prerequisite: High Voltage Electrical Safety or equivalent
Attendee Requirements:
Computer/tablet (this course will share content using Microsoft Teams, a phone screen will be too small to read the content)
Microphone and/or headset
Email address unique to attendee to receive link to exam
Course will begin at 8 AM and will run until approximately 4:30 PM with a 1 hour lunch break and other breaks as needed
Supported browsers are Microsoft Edge, Google Chrome, Firefox, and Safari.
What You Receive
Following the course and successful completion of the exam you will receive by mail:
Certification certificate
Wallet card
Hardhat sticker
Online Instructor Led High Voltage Electrical Safety (QEW) Course
Online Instructor Led QEW Course - May 12 & 13, 2026
This two-day course is offered online and will cover and exceed provincial and federal electrical safety requirements for working on high voltage electrical equipment. This course focuses on recognizing and understanding electrical hazards while using the proper procedures for controlling the risk of electric shock, arc flash and arc blast. This course is designed with a focus on industry-accepted standards, including the Workplace Electrical Safety Standard: CSA Z462. Individuals who work on electrical equipment are required to take this course.
Course Outline:
Information and Statistics
Applicable Legislation
Applicable Standards
Arc Flash and Electrical Shock Awareness
Operation of Electrical Equipment
Lockout Tagout and Isolation of Equipment
Personal Protective Equipment
Maintenance on Electrical Systems
Pre-Job Task Analysis
Who Should Attend This Course:
Journeyperson Electricians
Apprentice Electricians
Electrical Technologists
Electronics Technologists
Master Electricians
Journeyperson Instrument Mechanics
Electrical Engineers
Attendee Requirements:
Computer/tablet (this course will share content using Microsoft Teams, a phone screen will be too small to read the content)
Microphone and/or headset
Email address unique to attendee to receive link to exam
Course will begin at 8 AM and will run until approximately 4:30 PM with a 1 hour lunch break and other breaks as needed
Supported browsers are Microsoft Edge, Google Chrome, Firefox, and Safari.
What You Receive
Following the course and successful completion of the exam you will receive by mail:
Certification certificate
Wallet card
Hardhat sticker
Online Instructor Led High Voltage Qualified Electrical Worker (QEW) Refresher Course
Online Instructor Led High Voltage Qualified Electrical Worker (QEW) Refresher Course - May 27, 2026
This one day course covers the provincial and federal electrical safety requirements for working on electrical equipment that is 750V or greater. This course reviews electrical hazards and how to mitigate the risk of electric shock, arc flash and arc blast. This course highlights changes to industry-accepted standards, including but not limited to, the Workplace Electrical Safety Standard, CSA Z462. Individuals who work on electrical equipment are recommended to take this course every three years.
Who should attend this course:
Journeyperson Electricians
Apprentice Electricians
Electrical Technologist
Master Electricians
Journeyperson
Instrument Mechanics
Electrical Engineers
* Prerequisite: High Voltage Electrical Safety or equivalent
Attendee Requirements:
Computer/tablet (this course will share content using Microsoft Teams, a phone screen will be too small to read the content)
Microphone and/or headset
Email address unique to attendee to receive link to exam
Course will begin at 8 AM and will run until approximately 4:30 PM with a 1 hour lunch break and other breaks as needed
Supported browsers are Microsoft Edge, Google Chrome, Firefox, and Safari.
What You Receive
Following the course and successful completion of the exam you will receive by mail:
Certification certificate
Wallet card
Hardhat sticker
Online Instructor Led High Voltage Electrical Safety (QEW) Course
Online Instructor Led QEW Course - June 10 & 11, 2026
This two-day course is offered online and will cover and exceed provincial and federal electrical safety requirements for working on high voltage electrical equipment. This course focuses on recognizing and understanding electrical hazards while using the proper procedures for controlling the risk of electric shock, arc flash and arc blast. This course is designed with a focus on industry-accepted standards, including the Workplace Electrical Safety Standard: CSA Z462. Individuals who work on electrical equipment are required to take this course.
Course Outline:
Information and Statistics
Applicable Legislation
Applicable Standards
Arc Flash and Electrical Shock Awareness
Operation of Electrical Equipment
Lockout Tagout and Isolation of Equipment
Personal Protective Equipment
Maintenance on Electrical Systems
Pre-Job Task Analysis
Who Should Attend This Course:
Journeyperson Electricians
Apprentice Electricians
Electrical Technologists
Electronics Technologists
Master Electricians
Journeyperson Instrument Mechanics
Electrical Engineers
Attendee Requirements:
Computer/tablet (this course will share content using Microsoft Teams, a phone screen will be too small to read the content)
Microphone and/or headset
Email address unique to attendee to receive link to exam
Course will begin at 8 AM and will run until approximately 4:30 PM with a 1 hour lunch break and other breaks as needed
Supported browsers are Microsoft Edge, Google Chrome, Firefox, and Safari.
What You Receive
Following the course and successful completion of the exam you will receive by mail:
Certification certificate
Wallet card
Hardhat sticker
Online Instructor Led High Voltage Qualified Electrical Worker (QEW) Refresher Course
Online Instructor Led High Voltage Qualified Electrical Worker (QEW) Refresher Course - June 18, 2026
This one day course covers the provincial and federal electrical safety requirements for working on electrical equipment that is 750V or greater. This course reviews electrical hazards and how to mitigate the risk of electric shock, arc flash and arc blast. This course highlights changes to industry-accepted standards, including but not limited to, the Workplace Electrical Safety Standard, CSA Z462. Individuals who work on electrical equipment are recommended to take this course every three years.
Who should attend this course:
Journeyperson Electricians
Apprentice Electricians
Electrical Technologist
Master Electricians
Journeyperson
Instrument Mechanics
Electrical Engineers
* Prerequisite: High Voltage Electrical Safety or equivalent
Attendee Requirements:
Computer/tablet (this course will share content using Microsoft Teams, a phone screen will be too small to read the content)
Microphone and/or headset
Email address unique to attendee to receive link to exam
Course will begin at 8 AM and will run until approximately 4:30 PM with a 1 hour lunch break and other breaks as needed
Supported browsers are Microsoft Edge, Google Chrome, Firefox, and Safari.
What You Receive
Following the course and successful completion of the exam you will receive by mail:
Certification certificate
Wallet card
Hardhat sticker
Online Instructor Led High Voltage Electrical Safety (QEW) Course
Online Instructor Led QEW Course - July 08 & 09, 2026
This two-day course is offered online and will cover and exceed provincial and federal electrical safety requirements for working on high voltage electrical equipment. This course focuses on recognizing and understanding electrical hazards while using the proper procedures for controlling the risk of electric shock, arc flash and arc blast. This course is designed with a focus on industry-accepted standards, including the Workplace Electrical Safety Standard: CSA Z462. Individuals who work on electrical equipment are required to take this course.
Course Outline:
Information and Statistics
Applicable Legislation
Applicable Standards
Arc Flash and Electrical Shock Awareness
Operation of Electrical Equipment
Lockout Tagout and Isolation of Equipment
Personal Protective Equipment
Maintenance on Electrical Systems
Pre-Job Task Analysis
Who Should Attend This Course:
Journeyperson Electricians
Apprentice Electricians
Electrical Technologists
Electronics Technologists
Master Electricians
Journeyperson Instrument Mechanics
Electrical Engineers
Attendee Requirements:
Computer/tablet (this course will share content using Microsoft Teams, a phone screen will be too small to read the content)
Microphone and/or headset
Email address unique to attendee to receive link to exam
Course will begin at 8 AM and will run until approximately 4:30 PM with a 1 hour lunch break and other breaks as needed
Supported browsers are Microsoft Edge, Google Chrome, Firefox, and Safari.
What You Receive
Following the course and successful completion of the exam you will receive by mail:
Certification certificate
Wallet card
Hardhat sticker
Online Instructor Led High Voltage Qualified Electrical Worker (QEW) Refresher Course
Online Instructor Led High Voltage Qualified Electrical Worker (QEW) Refresher Course - July 23, 2026
This one day course covers the provincial and federal electrical safety requirements for working on electrical equipment that is 750V or greater. This course reviews electrical hazards and how to mitigate the risk of electric shock, arc flash and arc blast. This course highlights changes to industry-accepted standards, including but not limited to, the Workplace Electrical Safety Standard, CSA Z462. Individuals who work on electrical equipment are recommended to take this course every three years.
Who should attend this course:
Journeyperson Electricians
Apprentice Electricians
Electrical Technologist
Master Electricians
Journeyperson
Instrument Mechanics
Electrical Engineers
* Prerequisite: High Voltage Electrical Safety or equivalent
Attendee Requirements:
Computer/tablet (this course will share content using Microsoft Teams, a phone screen will be too small to read the content)
Microphone and/or headset
Email address unique to attendee to receive link to exam
Course will begin at 8 AM and will run until approximately 4:30 PM with a 1 hour lunch break and other breaks as needed
Supported browsers are Microsoft Edge, Google Chrome, Firefox, and Safari.
What You Receive
Following the course and successful completion of the exam you will receive by mail:
Certification certificate
Wallet card
Hardhat sticker
Online Instructor Led High Voltage Electrical Safety (QEW) Course
Online Instructor Led QEW Course - August 12 & 13, 2026
This two-day course is offered online and will cover and exceed provincial and federal electrical safety requirements for working on high voltage electrical equipment. This course focuses on recognizing and understanding electrical hazards while using the proper procedures for controlling the risk of electric shock, arc flash and arc blast. This course is designed with a focus on industry-accepted standards, including the Workplace Electrical Safety Standard: CSA Z462. Individuals who work on electrical equipment are required to take this course.
Course Outline:
Information and Statistics
Applicable Legislation
Applicable Standards
Arc Flash and Electrical Shock Awareness
Operation of Electrical Equipment
Lockout Tagout and Isolation of Equipment
Personal Protective Equipment
Maintenance on Electrical Systems
Pre-Job Task Analysis
Who Should Attend This Course:
Journeyperson Electricians
Apprentice Electricians
Electrical Technologists
Electronics Technologists
Master Electricians
Journeyperson Instrument Mechanics
Electrical Engineers
Attendee Requirements:
Computer/tablet (this course will share content using Microsoft Teams, a phone screen will be too small to read the content)
Microphone and/or headset
Email address unique to attendee to receive link to exam
Course will begin at 8 AM and will run until approximately 4:30 PM with a 1 hour lunch break and other breaks as needed
Supported browsers are Microsoft Edge, Google Chrome, Firefox, and Safari.
What You Receive
Following the course and successful completion of the exam you will receive by mail:
Certification certificate
Wallet card
Hardhat sticker
Online Instructor Led High Voltage Qualified Electrical Worker (QEW) Refresher Course
Online Instructor Led High Voltage Qualified Electrical Worker (QEW) Refresher Course - August 20, 2026
This one day course covers the provincial and federal electrical safety requirements for working on electrical equipment that is 750V or greater. This course reviews electrical hazards and how to mitigate the risk of electric shock, arc flash and arc blast. This course highlights changes to industry-accepted standards, including but not limited to, the Workplace Electrical Safety Standard, CSA Z462. Individuals who work on electrical equipment are recommended to take this course every three years.
Who should attend this course:
Journeyperson Electricians
Apprentice Electricians
Electrical Technologist
Master Electricians
Journeyperson
Instrument Mechanics
Electrical Engineers
* Prerequisite: High Voltage Electrical Safety or equivalent
Attendee Requirements:
Computer/tablet (this course will share content using Microsoft Teams, a phone screen will be too small to read the content)
Microphone and/or headset
Email address unique to attendee to receive link to exam
Course will begin at 8 AM and will run until approximately 4:30 PM with a 1 hour lunch break and other breaks as needed
Supported browsers are Microsoft Edge, Google Chrome, Firefox, and Safari.
What You Receive
Following the course and successful completion of the exam you will receive by mail:
Certification certificate
Wallet card
Hardhat sticker
Online Instructor Led High Voltage Electrical Safety (QEW) Course
Online Instructor Led QEW Course - September 09 & 10, 2026
This two-day course is offered online and will cover and exceed provincial and federal electrical safety requirements for working on high voltage electrical equipment. This course focuses on recognizing and understanding electrical hazards while using the proper procedures for controlling the risk of electric shock, arc flash and arc blast. This course is designed with a focus on industry-accepted standards, including the Workplace Electrical Safety Standard: CSA Z462. Individuals who work on electrical equipment are required to take this course.
Course Outline:
Information and Statistics
Applicable Legislation
Applicable Standards
Arc Flash and Electrical Shock Awareness
Operation of Electrical Equipment
Lockout Tagout and Isolation of Equipment
Personal Protective Equipment
Maintenance on Electrical Systems
Pre-Job Task Analysis
Who Should Attend This Course:
Journeyperson Electricians
Apprentice Electricians
Electrical Technologists
Electronics Technologists
Master Electricians
Journeyperson Instrument Mechanics
Electrical Engineers
Attendee Requirements:
Computer/tablet (this course will share content using Microsoft Teams, a phone screen will be too small to read the content)
Microphone and/or headset
Email address unique to attendee to receive link to exam
Course will begin at 8 AM and will run until approximately 4:30 PM with a 1 hour lunch break and other breaks as needed
Supported browsers are Microsoft Edge, Google Chrome, Firefox, and Safari.
What You Receive
Following the course and successful completion of the exam you will receive by mail:
Certification certificate
Wallet card
Hardhat sticker
Online Instructor Led High Voltage Qualified Electrical Worker (QEW) Refresher Course
Online Instructor Led High Voltage Qualified Electrical Worker (QEW) Refresher Course - September 24, 2026
This one day course covers the provincial and federal electrical safety requirements for working on electrical equipment that is 750V or greater. This course reviews electrical hazards and how to mitigate the risk of electric shock, arc flash and arc blast. This course highlights changes to industry-accepted standards, including but not limited to, the Workplace Electrical Safety Standard, CSA Z462. Individuals who work on electrical equipment are recommended to take this course every three years.
Who should attend this course:
Journeyperson Electricians
Apprentice Electricians
Electrical Technologist
Master Electricians
Journeyperson
Instrument Mechanics
Electrical Engineers
* Prerequisite: High Voltage Electrical Safety or equivalent
Attendee Requirements:
Computer/tablet (this course will share content using Microsoft Teams, a phone screen will be too small to read the content)
Microphone and/or headset
Email address unique to attendee to receive link to exam
Course will begin at 8 AM and will run until approximately 4:30 PM with a 1 hour lunch break and other breaks as needed
Supported browsers are Microsoft Edge, Google Chrome, Firefox, and Safari.
What You Receive
Following the course and successful completion of the exam you will receive by mail:
Certification certificate
Wallet card
Hardhat sticker
Online Instructor Led High Voltage Electrical Safety (QEW) Course
Online Instructor Led QEW Course - October 07 & 08, 2026
This two-day course is offered online and will cover and exceed provincial and federal electrical safety requirements for working on high voltage electrical equipment. This course focuses on recognizing and understanding electrical hazards while using the proper procedures for controlling the risk of electric shock, arc flash and arc blast. This course is designed with a focus on industry-accepted standards, including the Workplace Electrical Safety Standard: CSA Z462. Individuals who work on electrical equipment are required to take this course.
Course Outline:
Information and Statistics
Applicable Legislation
Applicable Standards
Arc Flash and Electrical Shock Awareness
Operation of Electrical Equipment
Lockout Tagout and Isolation of Equipment
Personal Protective Equipment
Maintenance on Electrical Systems
Pre-Job Task Analysis
Who Should Attend This Course:
Journeyperson Electricians
Apprentice Electricians
Electrical Technologists
Electronics Technologists
Master Electricians
Journeyperson Instrument Mechanics
Electrical Engineers
Attendee Requirements:
Computer/tablet (this course will share content using Microsoft Teams, a phone screen will be too small to read the content)
Microphone and/or headset
Email address unique to attendee to receive link to exam
Course will begin at 8 AM and will run until approximately 4:30 PM with a 1 hour lunch break and other breaks as needed
Supported browsers are Microsoft Edge, Google Chrome, Firefox, and Safari.
What You Receive
Following the course and successful completion of the exam you will receive by mail:
Certification certificate
Wallet card
Hardhat sticker
Online Instructor Led High Voltage Qualified Electrical Worker (QEW) Refresher Course
Online Instructor Led High Voltage Qualified Electrical Worker (QEW) Refresher Course - October 22, 2026
This one day course covers the provincial and federal electrical safety requirements for working on electrical equipment that is 750V or greater. This course reviews electrical hazards and how to mitigate the risk of electric shock, arc flash and arc blast. This course highlights changes to industry-accepted standards, including but not limited to, the Workplace Electrical Safety Standard, CSA Z462. Individuals who work on electrical equipment are recommended to take this course every three years.
Who should attend this course:
Journeyperson Electricians
Apprentice Electricians
Electrical Technologist
Master Electricians
Journeyperson
Instrument Mechanics
Electrical Engineers
* Prerequisite: High Voltage Electrical Safety or equivalent
Attendee Requirements:
Computer/tablet (this course will share content using Microsoft Teams, a phone screen will be too small to read the content)
Microphone and/or headset
Email address unique to attendee to receive link to exam
Course will begin at 8 AM and will run until approximately 4:30 PM with a 1 hour lunch break and other breaks as needed
Supported browsers are Microsoft Edge, Google Chrome, Firefox, and Safari.
What You Receive
Following the course and successful completion of the exam you will receive by mail:
Certification certificate
Wallet card
Hardhat sticker
Online Instructor Led High Voltage Electrical Safety (QEW) Course
Online Instructor Led QEW Course - November 04 & 05, 2026
This two-day course is offered online and will cover and exceed provincial and federal electrical safety requirements for working on high voltage electrical equipment. This course focuses on recognizing and understanding electrical hazards while using the proper procedures for controlling the risk of electric shock, arc flash and arc blast. This course is designed with a focus on industry-accepted standards, including the Workplace Electrical Safety Standard: CSA Z462. Individuals who work on electrical equipment are required to take this course.
Course Outline:
Information and Statistics
Applicable Legislation
Applicable Standards
Arc Flash and Electrical Shock Awareness
Operation of Electrical Equipment
Lockout Tagout and Isolation of Equipment
Personal Protective Equipment
Maintenance on Electrical Systems
Pre-Job Task Analysis
Who Should Attend This Course:
Journeyperson Electricians
Apprentice Electricians
Electrical Technologists
Electronics Technologists
Master Electricians
Journeyperson Instrument Mechanics
Electrical Engineers
Attendee Requirements:
Computer/tablet (this course will share content using Microsoft Teams, a phone screen will be too small to read the content)
Microphone and/or headset
Email address unique to attendee to receive link to exam
Course will begin at 8 AM and will run until approximately 4:30 PM with a 1 hour lunch break and other breaks as needed
Supported browsers are Microsoft Edge, Google Chrome, Firefox, and Safari.
What You Receive
Following the course and successful completion of the exam you will receive by mail:
Certification certificate
Wallet card
Hardhat sticker
Online Instructor Led High Voltage Qualified Electrical Worker (QEW) Refresher Course
Online Instructor Led High Voltage Qualified Electrical Worker (QEW) Refresher Course - November 19, 2026
This one day course covers the provincial and federal electrical safety requirements for working on electrical equipment that is 750V or greater. This course reviews electrical hazards and how to mitigate the risk of electric shock, arc flash and arc blast. This course highlights changes to industry-accepted standards, including but not limited to, the Workplace Electrical Safety Standard, CSA Z462. Individuals who work on electrical equipment are recommended to take this course every three years.
Who should attend this course:
Journeyperson Electricians
Apprentice Electricians
Electrical Technologist
Master Electricians
Journeyperson
Instrument Mechanics
Electrical Engineers
* Prerequisite: High Voltage Electrical Safety or equivalent
Attendee Requirements:
Computer/tablet (this course will share content using Microsoft Teams, a phone screen will be too small to read the content)
Microphone and/or headset
Email address unique to attendee to receive link to exam
Course will begin at 8 AM and will run until approximately 4:30 PM with a 1 hour lunch break and other breaks as needed
Supported browsers are Microsoft Edge, Google Chrome, Firefox, and Safari.
What You Receive
Following the course and successful completion of the exam you will receive by mail:
Certification certificate
Wallet card
Hardhat sticker
Online Instructor Led High Voltage Electrical Safety (QEW) Course
Online Instructor Led QEW Course - December 09 & 10, 2026
This two-day course is offered online and will cover and exceed provincial and federal electrical safety requirements for working on high voltage electrical equipment. This course focuses on recognizing and understanding electrical hazards while using the proper procedures for controlling the risk of electric shock, arc flash and arc blast. This course is designed with a focus on industry-accepted standards, including the Workplace Electrical Safety Standard: CSA Z462. Individuals who work on electrical equipment are required to take this course.
Course Outline:
Information and Statistics
Applicable Legislation
Applicable Standards
Arc Flash and Electrical Shock Awareness
Operation of Electrical Equipment
Lockout Tagout and Isolation of Equipment
Personal Protective Equipment
Maintenance on Electrical Systems
Pre-Job Task Analysis
Who Should Attend This Course:
Journeyperson Electricians
Apprentice Electricians
Electrical Technologists
Electronics Technologists
Master Electricians
Journeyperson Instrument Mechanics
Electrical Engineers
Attendee Requirements:
Computer/tablet (this course will share content using Microsoft Teams, a phone screen will be too small to read the content)
Microphone and/or headset
Email address unique to attendee to receive link to exam
Course will begin at 8 AM and will run until approximately 4:30 PM with a 1 hour lunch break and other breaks as needed
Supported browsers are Microsoft Edge, Google Chrome, Firefox, and Safari.
What You Receive
Following the course and successful completion of the exam you will receive by mail:
Certification certificate
Wallet card
Hardhat sticker
Online Instructor Led High Voltage Qualified Electrical Worker (QEW) Refresher Course
Online Instructor Led High Voltage Qualified Electrical Worker (QEW) Refresher Course - December 16, 2026
This one day course covers the provincial and federal electrical safety requirements for working on electrical equipment that is 750V or greater. This course reviews electrical hazards and how to mitigate the risk of electric shock, arc flash and arc blast. This course highlights changes to industry-accepted standards, including but not limited to, the Workplace Electrical Safety Standard, CSA Z462. Individuals who work on electrical equipment are recommended to take this course every three years.
Who should attend this course:
Journeyperson Electricians
Apprentice Electricians
Electrical Technologist
Master Electricians
Journeyperson
Instrument Mechanics
Electrical Engineers
* Prerequisite: High Voltage Electrical Safety or equivalent
Attendee Requirements:
Computer/tablet (this course will share content using Microsoft Teams, a phone screen will be too small to read the content)
Microphone and/or headset
Email address unique to attendee to receive link to exam
Course will begin at 8 AM and will run until approximately 4:30 PM with a 1 hour lunch break and other breaks as needed
Supported browsers are Microsoft Edge, Google Chrome, Firefox, and Safari.
What You Receive
Following the course and successful completion of the exam you will receive by mail:
Certification certificate
Wallet card
Hardhat sticker
Online Instructor Led High Voltage Qualified Electrical Worker (QEW) Refresher Course
Online Instructor Led High Voltage Qualified Electrical Worker (QEW) Refresher Course - October 23, 2025
This one day course covers the provincial and federal electrical safety requirements for working on electrical equipment that is 750V or greater. This course reviews electrical hazards and how to mitigate the risk of electric shock, arc flash and arc blast. This course highlights changes to industry-accepted standards, including but not limited to, the Workplace Electrical Safety Standard, CSA Z462. Individuals who work on electrical equipment are recommended to take this course every three years.
Who should attend this course:
Journeyperson Electricians
Apprentice Electricians
Electrical Technologist
Master Electricians
Journeyperson
Instrument Mechanics
Electrical Engineers
* Prerequisite: High Voltage Electrical Safety or equivalent
Attendee Requirements:
Computer/tablet (this course will share content using Microsoft Teams, a phone screen will be too small to read the content)
Microphone and/or headset
Email address unique to attendee to receive link to exam
Course will begin at 8 AM and will run until approximately 4:30 PM with a 1 hour lunch break and other breaks as needed
Supported browsers are Microsoft Edge, Google Chrome, Firefox, and Safari.
What You Receive
Following the course and successful completion of the exam you will receive by mail:
Certification certificate
Wallet card
Hardhat sticker
Online Instructor Led High Voltage Electrical Safety (QEW) Course
Online Instructor Led QEW Course - October 8 & 9, 2025
This two-day course is offered online and will cover and exceed provincial and federal electrical safety requirements for working on high voltage electrical equipment. This course focuses on recognizing and understanding electrical hazards while using the proper procedures for controlling the risk of electric shock, arc flash and arc blast. This course is designed with a focus on industry-accepted standards, including the Workplace Electrical Safety Standard: CSA Z462. Individuals who work on electrical equipment are required to take this course.
Course Outline:
Information and Statistics
Applicable Legislation
Applicable Standards
Arc Flash and Electrical Shock Awareness
Operation of Electrical Equipment
Lockout Tagout and Isolation of Equipment
Personal Protective Equipment
Maintenance on Electrical Systems
Pre-Job Task Analysis
Who Should Attend This Course:
Journeyperson Electricians
Apprentice Electricians
Electrical Technologists
Electronics Technologists
Master Electricians
Journeyperson Instrument Mechanics
Electrical Engineers
Attendee Requirements:
Computer/tablet (this course will share content using Microsoft Teams, a phone screen will be too small to read the content)
Microphone and/or headset
Email address unique to attendee to receive link to exam
Course will begin at 8 AM and will run until approximately 4:30 PM with a 1 hour lunch break and other breaks as needed
Supported browsers are Microsoft Edge, Google Chrome, Firefox, and Safari.
What You Receive
Following the course and successful completion of the exam you will receive by mail:
Certification certificate
Wallet card
Hardhat sticker
Online Instructor Led High Voltage Qualified Electrical Worker (QEW) Refresher Course
Online Instructor Led High Voltage Qualified Electrical Worker (QEW) Refresher Course - September 25, 2025
This one day course covers the provincial and federal electrical safety requirements for working on electrical equipment that is 750V or greater. This course reviews electrical hazards and how to mitigate the risk of electric shock, arc flash and arc blast. This course highlights changes to industry-accepted standards, including but not limited to, the Workplace Electrical Safety Standard, CSA Z462. Individuals who work on electrical equipment are recommended to take this course every three years.
Who should attend this course:
Journeyperson Electricians
Apprentice Electricians
Electrical Technologist
Master Electricians
Journeyperson
Instrument Mechanics
Electrical Engineers
* Prerequisite: High Voltage Electrical Safety or equivalent
Attendee Requirements:
Computer/tablet (this course will share content using Microsoft Teams, a phone screen will be too small to read the content)
Microphone and/or headset
Email address unique to attendee to receive link to exam
Course will begin at 8 AM and will run until approximately 4:30 PM with a 1 hour lunch break and other breaks as needed
Supported browsers are Microsoft Edge, Google Chrome, Firefox, and Safari.
What You Receive
Following the course and successful completion of the exam you will receive by mail:
Certification certificate
Wallet card
Hardhat sticker
Online Instructor Led High Voltage Electrical Safety (QEW) Course
Online Instructor Led QEW Course - September 10 & 11, 2025
This two-day course is offered online and will cover and exceed provincial and federal electrical safety requirements for working on high voltage electrical equipment. This course focuses on recognizing and understanding electrical hazards while using the proper procedures for controlling the risk of electric shock, arc flash and arc blast. This course is designed with a focus on industry-accepted standards, including the Workplace Electrical Safety Standard: CSA Z462. Individuals who work on electrical equipment are required to take this course.
Course Outline:
Information and Statistics
Applicable Legislation
Applicable Standards
Arc Flash and Electrical Shock Awareness
Operation of Electrical Equipment
Lockout Tagout and Isolation of Equipment
Personal Protective Equipment
Maintenance on Electrical Systems
Pre-Job Task Analysis
Who Should Attend This Course:
Journeyperson Electricians
Apprentice Electricians
Electrical Technologists
Electronics Technologists
Master Electricians
Journeyperson Instrument Mechanics
Electrical Engineers
Attendee Requirements:
Computer/tablet (this course will share content using Microsoft Teams, a phone screen will be too small to read the content)
Microphone and/or headset
Email address unique to attendee to receive link to exam
Course will begin at 8 AM and will run until approximately 4:30 PM with a 1 hour lunch break and other breaks as needed
Supported browsers are Microsoft Edge, Google Chrome, Firefox, and Safari.
What You Receive
Following the course and successful completion of the exam you will receive by mail:
Certification certificate
Wallet card
Hardhat sticker
Online Instructor Led High Voltage Qualified Electrical Worker (QEW) Refresher Course
Online Instructor Led High Voltage Qualified Electrical Worker (QEW) Refresher Course - August 29, 2025
This one day course covers the provincial and federal electrical safety requirements for working on electrical equipment that is 750V or greater. This course reviews electrical hazards and how to mitigate the risk of electric shock, arc flash and arc blast. This course highlights changes to industry-accepted standards, including but not limited to, the Workplace Electrical Safety Standard, CSA Z462. Individuals who work on electrical equipment are recommended to take this course every three years.
Who should attend this course:
Journeyperson Electricians
Apprentice Electricians
Electrical Technologist
Master Electricians
Journeyperson
Instrument Mechanics
Electrical Engineers
* Prerequisite: High Voltage Electrical Safety or equivalent
Attendee Requirements:
Computer/tablet (this course will share content using Microsoft Teams, a phone screen will be too small to read the content)
Microphone and/or headset
Email address unique to attendee to receive link to exam
Course will begin at 8 AM and will run until approximately 4:30 PM with a 1 hour lunch break and other breaks as needed
Supported browsers are Microsoft Edge, Google Chrome, Firefox, and Safari.
What You Receive
Following the course and successful completion of the exam you will receive by mail:
Certification certificate
Wallet card
Hardhat sticker
Online Instructor Led High Voltage Electrical Safety (QEW) Course
Online Instructor Led QEW Course - August 12 & 13, 2025
This two-day course is offered online and will cover and exceed provincial and federal electrical safety requirements for working on high voltage electrical equipment. This course focuses on recognizing and understanding electrical hazards while using the proper procedures for controlling the risk of electric shock, arc flash and arc blast. This course is designed with a focus on industry-accepted standards, including the Workplace Electrical Safety Standard: CSA Z462. Individuals who work on electrical equipment are required to take this course.
Course Outline:
Information and Statistics
Applicable Legislation
Applicable Standards
Arc Flash and Electrical Shock Awareness
Operation of Electrical Equipment
Lockout Tagout and Isolation of Equipment
Personal Protective Equipment
Maintenance on Electrical Systems
Pre-Job Task Analysis
Who Should Attend This Course:
Journeyperson Electricians
Apprentice Electricians
Electrical Technologists
Electronics Technologists
Master Electricians
Journeyperson Instrument Mechanics
Electrical Engineers
Attendee Requirements:
Computer/tablet (this course will share content using Microsoft Teams, a phone screen will be too small to read the content)
Microphone and/or headset
Email address unique to attendee to receive link to exam
Course will begin at 8 AM and will run until approximately 4:30 PM with a 1 hour lunch break and other breaks as needed
Supported browsers are Microsoft Edge, Google Chrome, Firefox, and Safari.
What You Receive
Following the course and successful completion of the exam you will receive by mail:
Certification certificate
Wallet card
Hardhat sticker
Online Instructor Led High Voltage Qualified Electrical Worker (QEW) Refresher Course
Online Instructor Led High Voltage Qualified Electrical Worker (QEW) Refresher Course - July 24, 2025
This one day course covers the provincial and federal electrical safety requirements for working on electrical equipment that is 750V or greater. This course reviews electrical hazards and how to mitigate the risk of electric shock, arc flash and arc blast. This course highlights changes to industry-accepted standards, including but not limited to, the Workplace Electrical Safety Standard, CSA Z462. Individuals who work on electrical equipment are recommended to take this course every three years.
Who should attend this course:
Journeyperson Electricians
Apprentice Electricians
Electrical Technologist
Master Electricians
Journeyperson
Instrument Mechanics
Electrical Engineers
* Prerequisite: High Voltage Electrical Safety or equivalent
Attendee Requirements:
Computer/tablet (this course will share content using Microsoft Teams, a phone screen will be too small to read the content)
Microphone and/or headset
Email address unique to attendee to receive link to exam
Course will begin at 8 AM and will run until approximately 4:30 PM with a 1 hour lunch break and other breaks as needed
Supported browsers are Microsoft Edge, Google Chrome, Firefox, and Safari.
What You Receive
Following the course and successful completion of the exam you will receive by mail:
Certification certificate
Wallet card
Hardhat sticker
Online Instructor Led High Voltage Electrical Safety (QEW) Course
Online Instructor Led QEW Course - July 9 & 10, 2025
This two-day course is offered online and will cover and exceed provincial and federal electrical safety requirements for working on high voltage electrical equipment. This course focuses on recognizing and understanding electrical hazards while using the proper procedures for controlling the risk of electric shock, arc flash and arc blast. This course is designed with a focus on industry-accepted standards, including the Workplace Electrical Safety Standard: CSA Z462. Individuals who work on electrical equipment are required to take this course.
Course Outline:
Information and Statistics
Applicable Legislation
Applicable Standards
Arc Flash and Electrical Shock Awareness
Operation of Electrical Equipment
Lockout Tagout and Isolation of Equipment
Personal Protective Equipment
Maintenance on Electrical Systems
Pre-Job Task Analysis
Who Should Attend This Course:
Journeyperson Electricians
Apprentice Electricians
Electrical Technologists
Electronics Technologists
Master Electricians
Journeyperson Instrument Mechanics
Electrical Engineers
Attendee Requirements:
Computer/tablet (this course will share content using Microsoft Teams, a phone screen will be too small to read the content)
Microphone and/or headset
Email address unique to attendee to receive link to exam
Course will begin at 8 AM and will run until approximately 4:30 PM with a 1 hour lunch break and other breaks as needed
Supported browsers are Microsoft Edge, Google Chrome, Firefox, and Safari.
What You Receive
Following the course and successful completion of the exam you will receive by mail:
Certification certificate
Wallet card
Hardhat sticker
Online Instructor Led High Voltage Qualified Electrical Worker (QEW) Refresher Course
Online Instructor Led High Voltage Qualified Electrical Worker (QEW) Refresher Course - June 19, 2025
This one day course covers the provincial and federal electrical safety requirements for working on electrical equipment that is 750V or greater. This course reviews electrical hazards and how to mitigate the risk of electric shock, arc flash and arc blast. This course highlights changes to industry-accepted standards, including but not limited to, the Workplace Electrical Safety Standard, CSA Z462. Individuals who work on electrical equipment are recommended to take this course every three years.
Who should attend this course:
Journeyperson Electricians
Apprentice Electricians
Electrical Technologist
Master Electricians
Journeyperson
Instrument Mechanics
Electrical Engineers
* Prerequisite: High Voltage Electrical Safety or equivalent
Attendee Requirements:
Computer/tablet (this course will share content using Microsoft Teams, a phone screen will be too small to read the content)
Microphone and/or headset
Email address unique to attendee to receive link to exam
Course will begin at 8 AM and will run until approximately 4:30 PM with a 1 hour lunch break and other breaks as needed
Supported browsers are Microsoft Edge, Google Chrome, Firefox, and Safari.
What You Receive
Following the course and successful completion of the exam you will receive by mail:
Certification certificate
Wallet card
Hardhat sticker
Online Instructor Led High Voltage Electrical Safety (QEW) Course
Online Instructor Led QEW Course - June 11 & 12, 2025
This two-day course is offered online and will cover and exceed provincial and federal electrical safety requirements for working on high voltage electrical equipment. This course focuses on recognizing and understanding electrical hazards while using the proper procedures for controlling the risk of electric shock, arc flash and arc blast. This course is designed with a focus on industry-accepted standards, including the Workplace Electrical Safety Standard: CSA Z462. Individuals who work on electrical equipment are required to take this course.
Course Outline:
Information and Statistics
Applicable Legislation
Applicable Standards
Arc Flash and Electrical Shock Awareness
Operation of Electrical Equipment
Lockout Tagout and Isolation of Equipment
Personal Protective Equipment
Maintenance on Electrical Systems
Pre-Job Task Analysis
Who Should Attend This Course:
Journeyperson Electricians
Apprentice Electricians
Electrical Technologists
Electronics Technologists
Master Electricians
Journeyperson Instrument Mechanics
Electrical Engineers
Attendee Requirements:
Computer/tablet (this course will share content using Microsoft Teams, a phone screen will be too small to read the content)
Microphone and/or headset
Email address unique to attendee to receive link to exam
Course will begin at 8 AM and will run until approximately 4:30 PM with a 1 hour lunch break and other breaks as needed
Supported browsers are Microsoft Edge, Google Chrome, Firefox, and Safari.
What You Receive
Following the course and successful completion of the exam you will receive by mail:
Certification certificate
Wallet card
Hardhat sticker
Online Instructor Led High Voltage Qualified Electrical Worker (QEW) Refresher Course
Online Instructor Led High Voltage Qualified Electrical Worker (QEW) Refresher Course - May 27, 2025
This one day course covers the provincial and federal electrical safety requirements for working on electrical equipment that is 750V or greater. This course reviews electrical hazards and how to mitigate the risk of electric shock, arc flash and arc blast. This course highlights changes to industry-accepted standards, including but not limited to, the Workplace Electrical Safety Standard, CSA Z462. Individuals who work on electrical equipment are recommended to take this course every three years.
Who should attend this course:
Journeyperson Electricians
Apprentice Electricians
Electrical Technologist
Master Electricians
Journeyperson
Instrument Mechanics
Electrical Engineers
* Prerequisite: High Voltage Electrical Safety or equivalent
Attendee Requirements:
Computer/tablet (this course will share content using Microsoft Teams, a phone screen will be too small to read the content)
Microphone and/or headset
Email address unique to attendee to receive link to exam
Course will begin at 8 AM and will run until approximately 4:30 PM with a 1 hour lunch break and other breaks as needed
Supported browsers are Microsoft Edge, Google Chrome, Firefox, and Safari.
What You Receive
Following the course and successful completion of the exam you will receive by mail:
Certification certificate
Wallet card
Hardhat sticker
In-Person Instructor Led High Voltage Electrical Safety (QEW) Course
In-Person Instructor Led QEW Course - May 7 & 8, 2025
This two-day course is offered In-Person and will cover and exceed provincial and federal electrical safety requirements for working on high voltage electrical equipment. This course focuses on recognizing and understanding electrical hazards while using the proper procedures for controlling the risk of electric shock, arc flash and arc blast. This course is designed with a focus on industry-accepted standards, including the Workplace Electrical Safety Standard: CSA Z462. Individuals who work on electrical equipment are required to take this course.
Course Outline:
Information and Statistics
Applicable Legislation
Applicable Standards
Arc Flash and Electrical Shock Awareness
Operation of Electrical Equipment
Lockout Tagout and Isolation of Equipment
Personal Protective Equipment
Maintenance on Electrical Systems
Pre-Job Task Analysis
Who Should Attend This Course:
Journeyperson Electricians
Apprentice Electricians
Electrical Technologists
Electronics Technologists
Master Electricians
Journeyperson Instrument Mechanics
Electrical Engineers
What You Receive
Following the course and successful completion of the exam you will receive by mail:
Certification certificate
Wallet card
Hardhat sticker
Online Instructor Led High Voltage Qualified Electrical Worker (QEW) Refresher Course
Online Instructor Led High Voltage Qualified Electrical Worker (QEW) Refresher Course - April 30, 2025
This one day course covers the provincial and federal electrical safety requirements for working on electrical equipment that is 750V or greater. This course reviews electrical hazards and how to mitigate the risk of electric shock, arc flash and arc blast. This course highlights changes to industry-accepted standards, including but not limited to, the Workplace Electrical Safety Standard, CSA Z462. Individuals who work on electrical equipment are recommended to take this course every three years.
Who should attend this course:
Journeyperson Electricians
Apprentice Electricians
Electrical Technologist
Master Electricians
Journeyperson
Instrument Mechanics
Electrical Engineers
* Prerequisite: High Voltage Electrical Safety or equivalent
Attendee Requirements:
Computer/tablet (this course will share content using Microsoft Teams, a phone screen will be too small to read the content)
Microphone and/or headset
Email address unique to attendee to receive link to exam
Course will begin at 8 AM and will run until approximately 4:30 PM with a 1 hour lunch break and other breaks as needed
Supported browsers are Microsoft Edge, Google Chrome, Firefox, and Safari.
What You Receive
Following the course and successful completion of the exam you will receive by mail:
Certification certificate
Wallet card
Hardhat sticker
Online Instructor Led High Voltage Electrical Safety (QEW) Course
Online Instructor Led QEW Course - April 8 & 9, 2025
This two-day course is offered online and will cover and exceed provincial and federal electrical safety requirements for working on high voltage electrical equipment. This course focuses on recognizing and understanding electrical hazards while using the proper procedures for controlling the risk of electric shock, arc flash and arc blast. This course is designed with a focus on industry-accepted standards, including the Workplace Electrical Safety Standard: CSA Z462. Individuals who work on electrical equipment are required to take this course.
Course Outline:
Information and Statistics
Applicable Legislation
Applicable Standards
Arc Flash and Electrical Shock Awareness
Operation of Electrical Equipment
Lockout Tagout and Isolation of Equipment
Personal Protective Equipment
Maintenance on Electrical Systems
Pre-Job Task Analysis
Who Should Attend This Course:
Journeyperson Electricians
Apprentice Electricians
Electrical Technologists
Electronics Technologists
Master Electricians
Journeyperson Instrument Mechanics
Electrical Engineers
Attendee Requirements:
Computer/tablet (this course will share content using Microsoft Teams, a phone screen will be too small to read the content)
Microphone and/or headset
Email address unique to attendee to receive link to exam
Course will begin at 8 AM and will run until approximately 4:30 PM with a 1 hour lunch break and other breaks as needed
Supported browsers are Microsoft Edge, Google Chrome, Firefox, and Safari.
What You Receive
Following the course and successful completion of the exam you will receive by mail:
Certification certificate
Wallet card
Hardhat sticker
Online Instructor Led High Voltage Qualified Electrical Worker (QEW) Refresher Course
Online Instructor Led High Voltage Qualified Electrical Worker (QEW) Refresher Course - March 27, 2025
This one day course covers the provincial and federal electrical safety requirements for working on electrical equipment that is 750V or greater. This course reviews electrical hazards and how to mitigate the risk of electric shock, arc flash and arc blast. This course highlights changes to industry-accepted standards, including but not limited to, the Workplace Electrical Safety Standard, CSA Z462. Individuals who work on electrical equipment are recommended to take this course every three years.
Who should attend this course:
Journeyperson Electricians
Apprentice Electricians
Electrical Technologist
Master Electricians
Journeyperson
Instrument Mechanics
Electrical Engineers
* Prerequisite: High Voltage Electrical Safety or equivalent
Attendee Requirements:
Computer/tablet (this course will share content using Microsoft Teams, a phone screen will be too small to read the content)
Microphone and/or headset
Email address unique to attendee to receive link to exam
Course will begin at 8 AM and will run until approximately 4:30 PM with a 1 hour lunch break and other breaks as needed
Supported browsers are Microsoft Edge, Google Chrome, Firefox, and Safari.
What You Receive
Following the course and successful completion of the exam you will receive by mail:
Certification certificate
Wallet card
Hardhat sticker
Online Instructor Led High Voltage Electrical Safety (QEW) Course
Online Instructor Led QEW Course - March 11 & 12, 2025
This two-day course is offered online and will cover and exceed provincial and federal electrical safety requirements for working on high voltage electrical equipment. This course focuses on recognizing and understanding electrical hazards while using the proper procedures for controlling the risk of electric shock, arc flash and arc blast. This course is designed with a focus on industry-accepted standards, including the Workplace Electrical Safety Standard: CSA Z462. Individuals who work on electrical equipment are required to take this course.
Course Outline:
Information and Statistics
Applicable Legislation
Applicable Standards
Arc Flash and Electrical Shock Awareness
Operation of Electrical Equipment
Lockout Tagout and Isolation of Equipment
Personal Protective Equipment
Maintenance on Electrical Systems
Pre-Job Task Analysis
Who Should Attend This Course:
Journeyperson Electricians
Apprentice Electricians
Electrical Technologists
Electronics Technologists
Master Electricians
Journeyperson Instrument Mechanics
Electrical Engineers
Attendee Requirements:
Computer/tablet (this course will share content using Microsoft Teams, a phone screen will be too small to read the content)
Microphone and/or headset
Email address unique to attendee to receive link to exam
Course will begin at 8 AM and will run until approximately 4:30 PM with a 1 hour lunch break and other breaks as needed
Supported browsers are Microsoft Edge, Google Chrome, Firefox, and Safari.
What You Receive
Following the course and successful completion of the exam you will receive by mail:
Certification certificate
Wallet card
Hardhat sticker
Online Instructor Led High Voltage Qualified Electrical Worker (QEW) Refresher Course
Online Instructor Led High Voltage Qualified Electrical Worker (QEW) Refresher Course - February 25, 2025
This one day course covers the provincial and federal electrical safety requirements for working on electrical equipment that is 750V or greater. This course reviews electrical hazards and how to mitigate the risk of electric shock, arc flash and arc blast. This course highlights changes to industry-accepted standards, including but not limited to, the Workplace Electrical Safety Standard, CSA Z462. Individuals who work on electrical equipment are recommended to take this course every three years.
Who should attend this course:
Journeyperson Electricians
Apprentice Electricians
Electrical Technologist
Master Electricians
Journeyperson
Instrument Mechanics
Electrical Engineers
* Prerequisite: High Voltage Electrical Safety or equivalent
Attendee Requirements:
Computer/tablet (this course will share content using Microsoft Teams, a phone screen will be too small to read the content)
Microphone and/or headset
Email address unique to attendee to receive link to exam
Course will begin at 8 AM and will run until approximately 4:30 PM with a 1 hour lunch break and other breaks as needed
Supported browsers are Microsoft Edge, Google Chrome, Firefox, and Safari.
What You Receive
Following the course and successful completion of the exam you will receive by mail:
Certification certificate
Wallet card
Hardhat sticker
Online Instructor Led High Voltage Electrical Safety (QEW) Course
Online Instructor Led QEW Course - February 12 & 13, 2025
This two-day course is offered online and will cover and exceed provincial and federal electrical safety requirements for working on high voltage electrical equipment. This course focuses on recognizing and understanding electrical hazards while using the proper procedures for controlling the risk of electric shock, arc flash and arc blast. This course is designed with a focus on industry-accepted standards, including the Workplace Electrical Safety Standard: CSA Z462. Individuals who work on electrical equipment are required to take this course.
Course Outline:
Information and Statistics
Applicable Legislation
Applicable Standards
Arc Flash and Electrical Shock Awareness
Operation of Electrical Equipment
Lockout Tagout and Isolation of Equipment
Personal Protective Equipment
Maintenance on Electrical Systems
Pre-Job Task Analysis
Who Should Attend This Course:
Journeyperson Electricians
Apprentice Electricians
Electrical Technologists
Electronics Technologists
Master Electricians
Journeyperson Instrument Mechanics
Electrical Engineers
Attendee Requirements:
Computer/tablet (this course will share content using Microsoft Teams, a phone screen will be too small to read the content)
Microphone and/or headset
Email address unique to attendee to receive link to exam
Course will begin at 8 AM and will run until approximately 4:30 PM with a 1 hour lunch break and other breaks as needed
Supported browsers are Microsoft Edge, Google Chrome, Firefox, and Safari.
What You Receive
Following the course and successful completion of the exam you will receive by mail:
Certification certificate
Wallet card
Hardhat sticker
Online Instructor Led High Voltage Qualified Electrical Worker (QEW) Refresher Course
Online Instructor Led High Voltage Qualified Electrical Worker (QEW) Refresher Course - January 29, 2025
This one day course covers the provincial and federal electrical safety requirements for working on electrical equipment that is 750V or greater. This course reviews electrical hazards and how to mitigate the risk of electric shock, arc flash and arc blast. This course highlights changes to industry-accepted standards, including but not limited to, the Workplace Electrical Safety Standard, CSA Z462. Individuals who work on electrical equipment are recommended to take this course every three years.
Who should attend this course:
Journeyperson Electricians
Apprentice Electricians
Electrical Technologist
Master Electricians
Journeyperson
Instrument Mechanics
Electrical Engineers
* Prerequisite: High Voltage Electrical Safety or equivalent
Attendee Requirements:
Computer/tablet (this course will share content using Microsoft Teams, a phone screen will be too small to read the content)
Microphone and/or headset
Email address unique to attendee to receive link to exam
Course will begin at 8 AM and will run until approximately 4:30 PM with a 1 hour lunch break and other breaks as needed
Supported browsers are Microsoft Edge, Google Chrome, Firefox, and Safari.
What You Receive
Following the course and successful completion of the exam you will receive by mail:
Certification certificate
Wallet card
Hardhat sticker
Online Instructor Led High Voltage Electrical Safety (QEW) Course
Online Instructor Led QEW Course - January 22 & 23, 2025
This two-day course is offered online and will cover and exceed provincial and federal electrical safety requirements for working on high voltage electrical equipment. This course focuses on recognizing and understanding electrical hazards while using the proper procedures for controlling the risk of electric shock, arc flash and arc blast. This course is designed with a focus on industry-accepted standards, including the Workplace Electrical Safety Standard: CSA Z462. Individuals who work on electrical equipment are required to take this course.
Course Outline:
Information and Statistics
Applicable Legislation
Applicable Standards
Arc Flash and Electrical Shock Awareness
Operation of Electrical Equipment
Lockout Tagout and Isolation of Equipment
Personal Protective Equipment
Maintenance on Electrical Systems
Pre-Job Task Analysis
Who Should Attend This Course:
Journeyperson Electricians
Apprentice Electricians
Electrical Technologists
Electronics Technologists
Master Electricians
Journeyperson Instrument Mechanics
Electrical Engineers
Attendee Requirements:
Computer/tablet (this course will share content using Microsoft Teams, a phone screen will be too small to read the content)
Microphone and/or headset
Email address unique to attendee to receive link to exam
Course will begin at 8 AM and will run until approximately 4:30 PM with a 1 hour lunch break and other breaks as needed
Supported browsers are Microsoft Edge, Google Chrome, Firefox, and Safari.
What You Receive
Following the course and successful completion of the exam you will receive by mail:
Certification certificate
Wallet card
Hardhat sticker
Online Instructor Led High Voltage Electrical Safety (QEW) Course
Online Instructor Led QEW Course - December 11 & 12, 2024
This two-day course is offered online and will cover and exceed provincial and federal electrical safety requirements for working on high voltage electrical equipment. This course focuses on recognizing and understanding electrical hazards while using the proper procedures for controlling the risk of electric shock, arc flash and arc blast. This course is designed with a focus on industry-accepted standards, including the Workplace Electrical Safety Standard: CSA Z462. Individuals who work on electrical equipment are required to take this course.
Course Outline:
Information and Statistics
Applicable Legislation
Applicable Standards
Arc Flash and Electrical Shock Awareness
Operation of Electrical Equipment
Lockout Tagout and Isolation of Equipment
Personal Protective Equipment
Maintenance on Electrical Systems
Pre-Job Task Analysis
Who Should Attend This Course:
Journeyperson Electricians
Apprentice Electricians
Electrical Technologists
Electronics Technologists
Master Electricians
Journeyperson Instrument Mechanics
Electrical Engineers
Attendee Requirements:
Computer/tablet (this course will share content using Microsoft Teams, a phone screen will be too small to read the content)
Microphone and/or headset
Email address unique to attendee to receive link to exam
Course will begin at 8 AM and will run until approximately 4:30 PM with a 1 hour lunch break and other breaks as needed
Supported browsers are Microsoft Edge, Google Chrome, Firefox, and Safari.
What You Receive
Following the course and successful completion of the exam you will receive by mail:
Certification certificate
Wallet card
Hardhat sticker
Online Instructor Led High Voltage Qualified Electrical Worker (QEW) Refresher Course
Online Instructor Led High Voltage Qualified Electrical Worker (QEW) Refresher Course - December 10, 2024
This one day course covers the provincial and federal electrical safety requirements for working on electrical equipment that is 750V or greater. This course reviews electrical hazards and how to mitigate the risk of electric shock, arc flash and arc blast. This course highlights changes to industry-accepted standards, including but not limited to, the Workplace Electrical Safety Standard, CSA Z462. Individuals who work on electrical equipment are recommended to take this course every three years.
Who should attend this course:
Journeyperson Electricians
Apprentice Electricians
Electrical Technologist
Master Electricians
Journeyperson
Instrument Mechanics
Electrical Engineers
* Prerequisite: High Voltage Electrical Safety or equivalent
Attendee Requirements:
Computer/tablet (this course will share content using Microsoft Teams, a phone screen will be too small to read the content)
Microphone and/or headset
Email address unique to attendee to receive link to exam
Course will begin at 8 AM and will run until approximately 4:30 PM with a 1 hour lunch break and other breaks as needed
Supported browsers are Microsoft Edge, Google Chrome, Firefox, and Safari.
What You Receive
Following the course and successful completion of the exam you will receive by mail:
Certification certificate
Wallet card
Hardhat sticker
Online Instructor Led High Voltage Electrical Safety (QEW) Course
Online Instructor Led QEW Course - November 13 & 14, 2024
This two-day course is offered online and will cover and exceed provincial and federal electrical safety requirements for working on high voltage electrical equipment. This course focuses on recognizing and understanding electrical hazards while using the proper procedures for controlling the risk of electric shock, arc flash and arc blast. This course is designed with a focus on industry-accepted standards, including the Workplace Electrical Safety Standard: CSA Z462. Individuals who work on electrical equipment are required to take this course.
Course Outline:
Information and Statistics
Applicable Legislation
Applicable Standards
Arc Flash and Electrical Shock Awareness
Operation of Electrical Equipment
Lockout Tagout and Isolation of Equipment
Personal Protective Equipment
Maintenance on Electrical Systems
Pre-Job Task Analysis
Who Should Attend This Course:
Journeyperson Electricians
Apprentice Electricians
Electrical Technologists
Electronics Technologists
Master Electricians
Journeyperson Instrument Mechanics
Electrical Engineers
Attendee Requirements:
Computer/tablet (this course will share content using Microsoft Teams, a phone screen will be too small to read the content)
Microphone and/or headset
Email address unique to attendee to receive link to exam
Course will begin at 8 AM and will run until approximately 4:30 PM with a 1 hour lunch break and other breaks as needed
Supported browsers are Microsoft Edge, Google Chrome, Firefox, and Safari.
What You Receive
Following the course and successful completion of the exam you will receive by mail:
Certification certificate
Wallet card
Hardhat sticker
Online Instructor Led High Voltage Qualified Electrical Worker (QEW) Refresher Course
Online Instructor Led High Voltage Qualified Electrical Worker (QEW) Refresher Course - October 24, 2024
This one day course covers the provincial and federal electrical safety requirements for working on electrical equipment that is 750V or greater. This course reviews electrical hazards and how to mitigate the risk of electric shock, arc flash and arc blast. This course highlights changes to industry-accepted standards, including but not limited to, the Workplace Electrical Safety Standard, CSA Z462. Individuals who work on electrical equipment are recommended to take this course every three years.
Who should attend this course:
Journeyperson Electricians
Apprentice Electricians
Electrical Technologist
Master Electricians
Journeyperson
Instrument Mechanics
Electrical Engineers
* Prerequisite: High Voltage Electrical Safety or equivalent
Attendee Requirements:
Computer/tablet (this course will share content using Microsoft Teams, a phone screen will be too small to read the content)
Microphone and/or headset
Email address unique to attendee to receive link to exam
Course will begin at 8 AM and will run until approximately 4:30 PM with a 1 hour lunch break and other breaks as needed
Supported browsers are Microsoft Edge, Google Chrome, Firefox, and Safari.
What You Receive
Following the course and successful completion of the exam you will receive by mail:
Certification certificate
Wallet card
Hardhat sticker